Oil Coolers

Oil cooling is normally the use of engine oil as a coolant, typically to remove surplus heat fom an internal combustion engine.

The hot engine transfers heat to the oil, which then usually passes through a heat exchanger, typically known as an oil cooler!

The cooled oil flows back into the hot object to cool it continously. Commonly known as?: HEAT TRANSFER, or M.R.S. HEAT TRANSFER LTD (we think sounds better!)

This is where we can help every Time !

Weather we supply a new oil cooler if its available to the aftermarket, or we repair / re-manufacture your existing unit with a full twelve months warranty of course!

Or even manufacture a unit from scratch to your bespoke drwaings if you dont have one to copy as sample, you can be assured M.R.S HEAT TRANSFER LTD will reccomend the best possible cooling element for your particular application.



Some of the cheaper oil coolers which are manufactured to a cost are glued?

YES!  But depending on the application, if its a one off application – Cheap is important!  However, WE WONT SUPPLY YOU WITH ONE OF THESE.  Sorry but our reputation is worth more!

We would recommend the following types of elements, Brazed, Welded and PLATE AND BAR, plate and bar being the strongest by far!

You would normally find the plate and bar system in HYDRAULIC OIL COOLERS, if plate and bar is used but not in the hydraulic capacity, it is usually because of its harsh environment in which it spends its daily life. eg: Heavy duty plant equipment, mining equipment and quarry equipment where the vehicles will experience huge amounts of vibration.

AUTOMOTIVE OILCOOLERS

Any vehicle can benefit from adding an oil cooler to the cooling system, for instance, when a vehicle is being driven hard for long extended period of times without rest, such as a commercial vehicle fully loaded on a long uphill journey is a typicall example of when overheating occurs. High perforamance sports car / track car / rally car on an endurance rally would also take its toll. In situations like these, an additional oil cooler would be of great assistance!

We supply of the shelf UNIVERSAL OIL COOLERS to suit such demands, ranging in sizes from 7 to 44 rows, in popular bsp sizes ranging from 1/2″ BSP to 3/4″BSP male fittings.

We can supply any other thread fitting you feel is more suitable to your own requirements and can quote as per requirement.

You may relate to this type of oil cooler known as:

Mocal Oil Cooler

Setrab Oil Cooler

Oxford Oil Cooler

Universal Oil Cooler

Conclusion

So Where else other than Automotive applications and Hydraulic applications could we expect to find Oil coolers like these?

Well the list goes on and on and on and on!

But to list a few?

LIFT CONSTRUCTION

CHEMICAL INDUSTRY

PRINTING MACHINES

GEAR MANUFACTURE

HOISTING AND CONVEYANCING TECHNOLOGY

COMPRESSOR CONSTRUCTION

PLASTICS AND DIE CASTING MACHINES

MARINE INDUSTRY, SHIP BUILDING ( OFFSHORE )

MINING , TUNNEL CONSTHRUCTION

MOBILE HYDRAULICS

PRESS MANUFACTURE

TYRE RUBBE INDUSTRY

TEXTILE MACHINERY MACHINE TOOLS

GENERAL MACHINERY ENGINEERING

AGRICULTURAL MACHINERY

QUARRY EQUIPMENT

For your next application / requirement contact us, you wont be dissappointed!